There is not very much left to do on this Premier xylophone since the vast majority of the work was modifying the metal trolley which was shown in part one. As with most instruments, finishing (by which I mean applying a finish, paint, varnish, polish, etc) happens towards the end of the process. I suppose it is like decorating a room in your house, there is a lot of preparatory work then the final coat goes on and everything comes together.
However unlike decorating, applying a finish to an instrument is not finishing an instrument. The final process is what is setting it up. On a xylophone this is straight forward, simply a matter tweaking note pegs, whereas on a timpani the set up is most of the job, the repair often being a minor element.
Along with tweaking note pegs there is invariably some fragging to be done, some cleaning, and checking the bits I haven’t looked at, in this case the resonators. Making sure the instrument works properly and is ready to be returned to the customer.