Tag: new

Vintage Bass Drum (part 2) (Job No: 1233)

In the first half of the repair of this vintage bass drum (1233: (pt 1)), I wrote about making a new counter hoop, fixing the shell and making replacement tuning lugs.  The lugs are now back from the chrome platers, but more importantly, the drum is now needed by my customer at the end of the month.  In order for me to realise the deadline, and fit in with my delivery schedule, I need to finish the bass drum today so it is ready to be delivered at the end of the week.

After selecting a calfskin big enough and then putting it in to soak, I get everything ready to lap the head onto the existing flesh hood that I repaired.



I like to leave the lapping to dry for a bit, so that the skin becomes tacky and starts to stick to itself before I put it on the drum.  It will take 48hrs for the skin to completely dry around the hoop, but the playing surface will start drying quickly.  So as long as I keep the playing surface wet, I have plenty of time to do the drum and get the head on later in the day.

In 1233: (part 1) I made new barrels for the tension rods to screw into.  What I didn’t have was a tap long enough to put in a 2.1/4″ deep thread into the barrel.  I had to order these specially, so sent the stuff to be plated during the delay.  The video below shows the problem I had.  It is a bit boring (in both meanings of the word), but it shows how the thread feels like it is going on and on and on.



Once the threads are cut and checked, I can assemble the drum shell and start preparing to put on the head.

wpid-img_20150506_153910.jpg

I have mentioned putting on heads in other posts, and explained what I do.  This time I remembered to video it!



With both heads evenly set, the drum is now finished, and has plenty of time to dry before Friday.

wpid-img_20150506_171833.jpg

Today of course is polling day – time for us to support the essentially anti-democratic and self serving political system that we have here in the UK (and aggressively export).  We will all (well about 10% of us) go out and give a mandate for 650 corrupt, dishonest and dishonorable bloody idiots to avoid the big issues for another 5 years.  Politicians call it voter apathy (because they are a bit thick) but I think that they are wrong; it is not apathy, the general public is more political than ever (the one good thing that ukip have exposed).    In our democratic system we have no constitutional ability to change how the country is run.  The ability to do that is in the hands of the government, and mp’s won’t vote to get rid of themselves, they won’t even take a pay cut!  Rant over.

Premier Glockenspiel (part 3) (Job No: 1226)

This post continues from 1226: Premier Glock (part 2) and started in 1226: Premier Glock (part 1)

The base board gets a fresh coat of black, whilst the frame has its third coat of varnish.
wpid-wp-1416556900327.jpeg

The whole lot is then glued and screwed together.
wpid-wp-1416557057183.jpeg

Now I cut the new felt, gather all the note pegs I will need and re-assemble the whole glockenspiel.
wpid-wp-1416557367312.jpeg

Above is a picture of the instrument back in its case.  I am very pleased with the end result.  Notice the extra note on the accidentals – this is a high E flat I made in 1220: Glockenspiel Notes